Manual #199355
Rev 08/14/15
© 2015 Watts Premier
8716 West Ludlow Dr, Ste 1, Peoria, AZ 85381 • Tel. (800) 752-5582 • www.wattspremier.com
A Watts Water Technologies Company
RO Pure/Plus Connection Steps
Step 1 -
Remove the existing Automatic Shut off Valve
Step 2 -
Install the Booster Pump and Solenoid between the cold water adapt-a-valve and the connection behind the red filter (if needed,
use provided green tube)
Step 3 -
Install the provided elbow to the brine port on the filter module (please remove any existing elbows and/or flow restrictors)
Step 4 -
Connect the red flow restrictor tube into the brine elbow
Step 5 -
Connect the black tube into the hot water adapt-a-valve
Step 6 -
Splice the pressure switch on the line leading to the tank
STORAGE TANK
TANK
SHUT-OFF
VALVE
FAUCET
(BLUE)
COLD-WATER
SHUT-OFF
TO
KITCHEN
SINK
ADAPT-A-VALVE
BLUE TUBE - FAUCET
POST
CARBON
RO
PRE-
CARBON
SEDIMENT
TRANSFORMER
FILTER MODULE
PUMP
SELENOID
CHECK
VALVE
HOT-WATER
SHUT-OFF
FEED (GREEN)
TANK (BLUE)
BRINE (BLACK)
WIRE HARNESS
DRAIN
SADDLE
PLUG
TO
KITCHEN
SINK
FAUCET (BLUE)
FAUCET
FEED (GREEN)
TANK (BLUE)
BRINE
(RED)
PRESSURE
SWITCH
REAR VIEW OF FILTER MODULE
BRINE (WASTE) PORT
1
2
3
4
TANK (BLUE)
FEED (GREEN)
BRINE (RED)
5
6
