Page 8
WATTS
Premier Monitored (Top Mount) Faucet Installation
5
5.
Feed the toggle bolt and tubes through the mounting hole in the
sink. Test fit faucet placement.
7.
Insert your Phillips head screwdriver throught the spout hole of the
RO faucet and torque the toggle bolt until the faucet is secure.
Do not overtighten!
6
A 1.0” - 1.25” Mounting hole is required for faucet installation.
9.
Pull the Battery Safety Tab out to activate faucet monitor.
Make sure that the clear drawer is firmly seated in the
faucet base. The monitor will flash briefly once activated.
8.
Insert spout into the faucet base until fully seated.
9
8
7
A) Connect tubes to the RO faucet (Figure A)
B) Mount the RO faucet (Figure B)
C) Pull Battery Tab and Install Spout (Figure C)
This RO faucet is equipped with quick connect fittings for easy tube
installation. To connect tubes, simply push them
firmly
into their
corresponding fitting on the RO faucet until fully seated.
2.
Connect 1/4”
BLUE
tube.
(1/4” Fitting Adapter on Toggle Bolt)
3.
Connect 3/8”
BLACK
tube .
(3/8” Fitting on base of faucet)
4.
Connect 1/4”
RED
tube.
(1/4” Fitting on base of faucet)
A
B
C
6.
Peel the white backing paper off the seal on the bottom of the
faucet base and press firmly over the mounting location.
“This product contains a button cell battery. If swallowed, it
could cause severe injury or death in just 2 hours.
Seek medical attention immediately.”
CAUTION!
The RED tubing has one BENT end and one STRAIGHT
end. Insert the STRAIGHT
end firmly into the faucet fitting.
The BLUE tubing has one BENT end and one STRAIGHT
end. Insert the STRAIGHT
end firmly into the faucet fitting.
(2) BLUE
(3) BLACK
(4) RED
3/8 Stem x 1/4” QC Adapter
3/8” Fitting
Toggle Bolt
(1) 1/4” Blue Tube
(2) 1/4” Red Tube
(3) 3/8” Black Tube
In the parts bag, locate one 3/8” Stem x 1/4” Quick connect
fitting adapter, one 1/4” red tube, one 1/4” blue tube and one
3/8” black tube.
1.
Insert the 3/8” Stem adapter into the 3/8”fitting located on the
end of the toggle bolt assembly.
Insert one open end firmly into the faucet fitting.
Spout Hole
