√
1 FILTER PURE Unit
√
1 Parts Bag
√
1 Green Tube
√
2
Filters
√
1 Faucet Assembly
√
1 Blue Tube
If any of the items are missing, please contact Watts Premier prior to installing
Contents of the Filter-Pure System
4
Operational Parameters
Maximum
Minimum
Operational Temperature
100°F (37.8°C)
40°F (4.4°C)
Operating Pressure
85 psi (5.98 kg/cm²)
20 psi (1.406 kg/cm²)
pH Parameters
10
5
Flow Rate
0.5 GPM @ 60 psig
Installation must comply with State and local plumbing regulations. Do not use with water that
is micro biologically unsafe or of unknown quality without adequate disinfection before or after
the system. System is intended to be installed using the cold water supply only.
Tools Recommended For Installation
√
1/2" Diamond Tipped Hole Saw bit for faucet opening (Porcelain Sinks) or,
√
1/2" Hole Saw Bit for faucet opening (Most Counter Tops - excluding marble) or,
√
1/2” Round Knock out Punch for faucet opening (Stainless Sinks)
√
1 1/4” Adjustable Wrench
√
1/2" Open End Wrench
√
Adjustable Pliers
√
Sharp
Knife
√
1/8" diamond tip bit, pilot hole
√
Electric Drill
√
Phillips Screw Driver
√
Phillips bit for electric drill