WB-200-IW-2-WHT Installation and Users Manual
pg.5
© 2012 Wattbox
™
TROUBLESHOOTING
Symptom
Possible Cause
Remedy
No power to devices plugged
into the WB-200-IW-2.
WB-200-IW-2 is not receiving power.
•
Verify that the circuit breaker on electrical
panel has not been tripped and is ON.
•
Check the in wall airing for proper connec-
tion.
Circuit breaker has been tripped.
•
Reset the circuit breaker.
•
If breaker continues to trip, the connected
devices may be drawing too much current or
there is a short in the wiring.
•
Unplug 1 device at a time and reset the
breaker.
•
Check the in wall wiring for a short.
Protected LED turns off
and connected devices not
receiving power.
WattBox internal surge protecting is
inoperative, indicating that multiple over
voltages have been received and the
WattBox has shutdown to protect con-
nected devices.
•
Unplug connected devices and contact your
dealer for service.
