wattbike.com
| 0115 945 5450 | [email protected]
@wattbike
facebook.com/wattbike
6. Connecting Bikes via ANT
Only the Model B WBM’s can be connected to Power Cycling SE via ANT.
Update your WBM firmware to version 1.20 or greater to ensure ANT+ support. You can download
the latest firmware at
wattbike.com
To connect the bikes via ANT+, follow the steps:
•
Plug the ANT+ USB stick into the Computer/ Laptop,
•
Turn on the WBM(s) that will be used in the session,
•
To ensure the WBM(s) transmit the correct data, select ANT Channel from the main menu on
each of the bikes (fig 6.0), and then select the wattbike (WB) ANT channel from the list (fig 6.1).
•
Alternatively, you can use any ANT channel that includes WB, e.g., WB + SPC if the riders
would like to connect their cycling computers to the bikes (See owners manual)
•
Then follow the steps in sections 6. Activity or 7. Race to complete the connection.
fig 6.0
fig 6.1
Please note:
If the monitors are used
only with Power Cycling SE,
the ANT Channel should be
switched to Wattbike protocol
