![background image](http://html1.mh-extra.com/html/wattbike/studio-edition/studio-edition_user-manual_3741367012.webp)
12
Power Cycling SE User Manual |
09/2014-v1.0EN
4.
Clicking the check box next to the WBM serial number will ‘Enable’ and enter those bikes into
the race. Alternatively, to rename a bike from the activity untick the box.
5.
To order the bikes manually, click the Up and Down arrows near the bottom left hand side
of the screen. This feature will enable the user to set the bikes numbering in order for their
arrangement in the studio to come up in their respective positions on screen.
6.
Click okay to continue through to the bike allocation stage ‘Race Start Screen (fig 8.3). At this
point the software will allocate the bikes a race number, such as ‘Bike 1’, ‘Bike 2’ etc… the race
numbers will flash on the bottom section of the WBMs.
7.
Enter the race distance required then click ‘Ok’ to progress to the race start page (fig 8.4).
fig 8.2
fig 8.3