L I N K I N G U P A H E A R T R A T E S E N S O R
The Wattbike is compatible with all popular HR belts, and can be synced
up either before or during a session. Simply tap the HR icon at the top of
the screen to link up at any time.
C O N N E C T I N G T O T H I R D P A R T Y A P P S
Your Icon can connect to third party training apps such as The Sufferfest,
Zwift and TrainerRoad through your phone or tablet. To do this, follow the
below steps:
1.
Enable Bluetooth or ANT+ on your device
(phone, tablet or computer)
2.
Open your preferred training app and navigate to the
point of connecting your indoor trainer
3.
Select the ID shown in the top left corner of the Performance
Touchscreen, for example: ‘WattbikeIcon12345’ or ‘12345’
4.
The touchscreen will switch to a Quick Ride screen and display your
Wattbike workout data
5.
Wattbike workout data will be transmitted to your chosen
third party app
You can connect to any training apps which support Bluetooth or ANT+
*
.
0 6
G E T C O N N E C T E D
C O N N E C T I N G T O A N E T W O R K
1
Swipe up from the bottom of the screen
2
Select the dot at the bottom of the screen
* To use third party apps, a mobile device needs to be connected to the Wattbike via Bluetooth or ANT+,
and personal subscriptions to the app are also required.
_ P 1 8
_ P 1 9
