Wattbike ATOM, Quick Start Manual

Page: 6 / 12

ATOM
QUICK START GUIDE
1
Remove the Atom and its accessories from the packaging.
2 A
Screw the right pedal onto the right crank.
Tighten clockwise securely using a 6mm Allen key.
2 B
Screw the left pedal onto the left crank.
Tighten anti-clockwise securely using a 6mm Allen key.
3 A
Take the two Tri-bars and insert them into the
Tri-bar clamps.
3 B
Level up the two Tri-bar ends in the clamps,
tighten the securing screw using the 4mm Allen key.
4
To mount the Tri-pads, remove the Velcro pad from the
Tri-pad cup. Remove the screws from the mount. Line up
the holes in the mount with the Tri-pad cup. Insert the two
screws and tighten using the 4mm Allen key.
5
Before riding the Atom ensure all bolts are tight to secure
the handlebar fixings.
6
Plug your Atom into a wall outlet using the power
adaptor provided. Make sure the switch on the
outlet and on the rear of the Atom are turned on.
04
G E T R E A D Y
T O R I D E
B U I L D
F I G 0 1
Tighten the Tri-bar bolts
(suggested torque 5 Nm or 3.7 ft.lb.)