EVI - GUI user manual
revAA
4
Product datasheet. The given values are susceptible to change without prior notice.
3
Wiring
3.1
LV - Low voltage connector
LV connector is used to supply power to EVI board.
Connector Reference (converter side): Phoenix Contact MSTBA 2,5/ 2-G-5,08 1757242.
Recommended mating connector (wire harness side):
•
FKC 2,5/ 2-ST-5,08 1873058 (Push-in spring connection)
•
MSTBP 2,5/ 2-ST-5,08
–
1769010 (Screw connection)
Make sure not to swap LV+ with LV- as it would damage the board. In the image below, LV+ is
represented by the red wire, and LV- is represented by the black wire. The power cable should be
connected to a power supply, providing a voltage between 11V and 29V:
Figure 1: EVI LV wiring
