29
m-120-en-02
Direction
For remote direction change:
Enable remote direction control and disable the
DIRECTION
key on the keypad by fitting a link between
pins4and 11.
Fita switch between pins5and 13.
OR:
Apply a TTL logicsignalto pin 5, ground to pin 12.
open:
clockwise
closed:
counterclockwise
logic low: clockwise
link
logic high:
counterclockwise
link
DC tacho output
For DC tacho output:
Connectexternalinstrumentation: positive terminalto pin 9; negative terminalto pin 3.
Note: Thisoutputisdesigned for low-resistance equipmentinputsof nominally 1kΩ.
