16
Manual
All settings and functions of the pump in manual mode are set and controlled by means of
key-presses. Immediately after the start-up display sequence detailed in: "Switching the
pump on in subsequent power cycles " on page 28, the manual mode home screen will be
displayed unless auto restart is enabled.
Auto restart is a feature which only affects pump operation when the pump is set to manual
mode, network mode and memodose mode. If Auto Restart is enabled and the pump is
operating in any of these modes, the pump will return to the last known settings from that
operating mode when the power is re-applied. When the pump is running it displays an
animated clockwise arrow. In normal operation, the direction of flow is into the bottom port
of the pumphead and out of the top port.
If an exclamation mark (!) is displayed, it indicates that the pump could automatically
restart at any time. In manual mode network mode and memodose mode, the 'Auto restart'
behaviour is configurable. If a padlock icon shows, it indicates that the keypad lock is on.
16.1
START
Starts the pump at the current flow displayed, and the display background changes to grey.
If the pump is already running, pressing this has no effect.
30
m-530sn-en-07
