20
323S
323U
323Du
400
400
400
314MC and 318MC microcassette pumpheads
314MC and 318MC microcassette pumpheads
314MC and 318MC microcassette pumpheads
314MC and 318MC microcassette pumpheads
314MC and 318MC microcassette pumpheads
Each pumphead offers 5 pumping channels, and the manifold tubing is preloaded in removable cassettes.
The 314MC pumphead has four rollers and is designed to provide higher flow rates. The 318MC pumphead
has eight rollers for higher pumping precision with less pulsation.
Each cassette will accept any one of nineteen tube sizes available. Adjacent cassettes may contain different
types or size of tubing.
New tube loads easily in the cassette design. Cassettes locate quickly with a single cam lever action that also
controls roller pressure against the tube.
Extension pumpheads may be added up to 10 channels. All are bayonet mounted for easy cleaning and fast set up.
Tube selection
The chemical compatibility list published in the Watson-Marlow catalogue or web site is only a guide. If in doubt
request a tube sample card for immersion trials.
Installa
Installa
Installa
Installa
Installation
tion
tion
tion
tion
The 323 drives require a mounting plate to attach a 314MC or 318MC pumphead.
Engage the pumphead drive slot with the end of the pump drive shaft. Continue to align the pumphead
until the bayonet engages with the mounting plate. Turn the pumphead until it locks into an upright
position.
Removal
Removal
Removal
Removal
Removal
Push the locking lever back and turn the pumphead anti-clockwise until it is free from the mounting
plate.
314MC and 318MC pumpheads must not run at speeds greater than 110rpm.
