Document #10-32813 Rev A; June 07, 2019
Page
16
of 69
NOTE: There is an issue with certain versions of Windows 10 OS where you cannot eject one drive
without the other drives being affected. If you notice this happening, use the
tool to mount
and unmount the drives. You'll be using
to configure the drives, and it has mount/unmount
buttons for each of the drives in it.
Figure 9: Use the Eject menu option to mount a drive to the PC
When the drive is mounted to the PC, you'll see the name of the drive recognized, and the PC will have exclusive con-
trol of the drives. In the image below, all three drives have been "ejected" or mounted to the PC. You can now see the
drive names for each: MICRO SD; NOR FLASH; and RAM DISK.
Figure 10: Drives Mounted to PC, Viewed in Windows Explorer
l
Note: If your computer is set up to automatically open the drive to view the directories on the drive, you may close it.
It is not necessary at this time to view any files on the drives
4. After you have mounted all three drives, from your computer’s start menu, open the
Device Manager
.
