Watlow Controller Series D8, User Manual

Page: 53 / 179

D8 Series User’s Guide
Chapter 3: Communicating by DeviceNet
53
ATTRIBUTE ACCESS NAME TYPE DESCRIPTION
14 (E hex) Get
Produced
Connection Path
EPATH
Specifies the Application Object(s)
whose data is to be produced by this
Connection Object.
15 (F hex) Get
Consumed
Connection Path
Length
UINT
Number of bytes in the Consumed
Connection Path Length
16 (10 hex) Get
Consumed
Connection Path
EPATH
Specifies the Application Object(s) that
are to receive data consumed by this
Connection Object.
Input Object
The Input Object provides read/write access to all input parameters. Instance 0 of this object
contains the class attributes listed in Table 3.17. The four-loop controller has four additional
instances, and the eight-loop controller has eight additional instances, each containing the attributes
listed in Table 3.18. Instance 1 corresponds to loop 1, instance 2 corresponds to loop 2, and so on.
Table 3.16 – Input Class and Services
Class Code 64 hex
Class Services 0E hex Get Attribute Single
Instance Services
0E hex Get Attribute Single
10 hex Set Attribute Single
Table 3.17 – Input Class Attributes (Instance 0)
ATTRIBUTE ACCESS NAME TYPE DESCRIPTION
1 (1 hex) Get Revision UINT Revision of this object
2 (2 hex) Get Max instance UINT Maximum instances of this object (8)
3 (3 hex) Get Number of instances UINT Number of object instances
Table 3.18 – Input Instance Attributes (Instances 1 to 4 or 8)
ATTRIBUTE ACCESS NAME TYPE DESCRIPTION
100 (64 hex) Get/Set Set Point INT See page 95.
101 (65 hex) Get Process Variable INT See page 97.
102 (66 hex) Get/Set Input Type SHORT_STRING See page 107.
103 (67 hex) Get/Set Loop Name SHORT_STRING See page 108.
104 (68 hex) Get/Set Input Units Array of 3 USINT See page 108.
105 (69 hex) Get/Set Calibration Offset INT See page 109.
106 (6A hex) Get/Set Reverse Thermocouple Detection BOOL See page 109.
107 (6B hex) Get/Set Display Format USINT See page 110.
108 (6C hex) Get/Set Input Range High INT See page 110.
109 (6D hex) Get/Set Input Range Low INT See page 111.
110 (6E hex) Get/Set Input High Signal INT See page 111.
111 (6F hex) Get/Set Input Low Signal INT See page 111.
112 (70 hex) Get/Set Input Filter USINT See page 112.