Watlow Controls Series 998, User Manual

Page: 63 / 126

WATLOW Series 998 User’s Manual
4.35 Setup Menus, Chapter 4
Annunciator
Select whether alarm messages will flash in the lower display.
[Anun] This prompt always appears.
Default
↓
[``On] [`OFF]
[Anun] [Anun]
Auto-tune Set Point
Select the percentage at which the controller will auto-tune the cur-
rent control set point.
[AtSP] This prompt always appears.
Default
↓
[``50] … [``90] … [`150] %
[AtSP] [AtSP] [AtSP]
Ramping Function for Channel A
Select when channel A will enter ramping mode.
• [Strt] Activates ramping on power up only.
• [StPt] Activates ramping on power up and any set point change.
[rP`A] This prompt always appears.
Default
↓
[`OFF] [Strt] [StPt]
[rP`A] [rP`A] [rP`A]
[Anun]
[AtSP]
Setup-Global
[rP`A]
NOTE:
Lower display alter-
nately flashes
{`rp`} and lower
display value when
ramping is in
process.