Watlow Controls Series 998, User Manual

Page: 48 / 126

4.20
WATLOW Series 998 User’s Manual
Setup Menus, Chapter 4
Setup-Output
Hysteresis 2A
Select the switching hysteresis for output 2A. This determines the
change in temperature or process units needed to turn the output from
full off to full on.
[HY2A] This prompt does not appear if output 2 is a process output.
If Default
↓ ↓
[``°F] [```1] … [```3] … [`999]
[`C_F] [HY2A] [HY2A] [HY2A]
(Global Menu)
[``°F]
&
[`r†d] [``)1] … [``#0] … [`9(9]
[`C_F] [`In1] [HY2A] [HY2A] [HY2A]
(Global Menu) (Input Menu)
[``°C] [```1] … [```2] … [`555]
[`C_F] [HY2A] [HY2A] [HY2A]
(Global Menu)
[``°C] & [`r†d] [``)1] … [``@0] … [`5%5]
[`C_F] [`In1] [HY2A] [HY2A] [HY2A]
(Global Menu) (Input Menu)
[```1] … [```3] … [`999]
units
a process input
[HY2A] [HY2A] [HY2A]
is selected
Process A
Select the process range for channel A.
[PrcA] This prompt appears only on controllers equipped with channel A
process hardware (99__-__F_-____).
Default
↓
4-20mA 0-20mA 0-5V Î 1-5V Î 0-10V Î (dc)
[4-20] [0-20] [`0-5] [`1-5] [0-10]
[PrcA] [PrcA] [PrcA] [PrcA] [PrcA]
[HY2A]
[PrcA]