4 - Standard Tasks - Remove and re-fit the Side-Trimmer Book Supports
20
Watkiss P2T 2-Knife Trimmer User Manual
Step 2 - remove the centre book support
The centre book support is secured with
spring clips.
Hold the centre book support with two
hands and pull in the direction shown
by the arrow, until it unclips from the
fixings.
Hold the outfeed guard open with one
hand and remove the centre book sup-
port though the opening.
See Figure 15 on page 18.
Step 3 - remove the inner book supports
There are two inner book supports.
Remove one at a time.
Hold each end of the inner book support
and lift upwards.
Remove the inner book support through
the top of the machine.
Repeat with the other inner book sup-
port.
Inner book support (right)