Engine mounts
Variable attachment to the outside of the
frame.
ATTENTION!
During installation, the supports
are turned over and the motor will hang in them
instead of standing on them.
Power cables
of 0.5 (plus) and 1.0 metres (minus)
already connected to the controller.
48 Volt Relais
The amperage depends on the selected
motor power.
Digital display
RJ45 2 x data cable (1 m. en 3 m.) and gateway
Throttle
Throttle and RJ45 data cable 3 m.
Dashboard with ignition switch
ATTENTION!
Not included in the standard scope of supply are vibration absorbers, fuse with fuse holder for
the battery cables, main switch and battery pack with charger.
20
21
