STYLE No. OTKM10, OT10KM
On Tap One Hole High Profile Kitchen Faucet
with Metal Wheel, Black Ball Handle and Spray
PAGE 3 OF 5 | UPDATED ON 8.1.2018
PRODUCT SUPPORT | 800.927.2120 | WATERWORKS.COM
INSTALLATION GUIDELINES
COLLAR
PLASTIC SLEEVE
SHANK
RUBBER WASHER
PLASTIC WASHER
NUT
COLLAR
PLASTIC SLEEVE
SHANK
RUBBER WASHER
PLASTIC WASHER
NUT
ESCUTCHEON
RUBBER WASHER
[DO NOT REMOVE]
5.
Unthread and remove the COLLAR, PLASTIC SLEEVE, NUT and WASHERS from the
SHANK then partially unthread the ESCUTHCHEON.
NOTE:
Do
NOT
remove the RUBBER WASHER beneath the ESCUTCHEON.
COLLAR
SHANK
PLASTIC SLEEVE
COLLAR
SPRAY HOSE
[CONICAL END]
COLLAR
SHANK
PLASTIC SLEEVE
COLLAR
SPRAY HOSE
[CONICAL END]
ESCUTCHEON
3.
2.
1.
NUT
PLASTIC WASHER
RUBBER WASHER
SHANK
RUBBER
WASHER
ESCUTCHEON †
† A RUBBER WASHER for the ESCUTCHEON is provided.
If desired, a bead of caulk or clear silicone may be applied
where the ESCUTCHEON contacts the mounting surface.
6.
Insert the SPRAY HOSE (conical end) through the SHANK, PLASTIC SLEEVE and COLLAR
then insert the SLEEVE back into the SHANK. Thread and securely tighten the COLLAR
onto the SHANK then thread the ESCUTCHEON up until it stops.
7.
Insert the SHANK through the hole on the mounting surface making sure the RUBBER
WASHER provided is beneath the ESCUTCHEON. Re-install the WASHERS then thread
and securely tighten the NUT.
OUTLET TUBE
SPRAYER
SPRAY HOSE
[HEX END]
FLOW
REGULATING
CHECK
VALVE
ADAPTER
[1/2" x 1/2"]
SPRAY HOSE
[CONICAL END]
8.
Thread and securely tighten the SPRAY HOSE (conical end) onto the SPRAYER and insert
the HOSE into the PLASTIC SLEEVE until it stops then thread and securely tighten the
HOSE (hex end) onto the ADAPTER on the OUTLET TUBE.
NOTE:
A FLOW REGULATING CHECK VALVE is located inside the ADAPTER.
