15
• RIGHT button: most of the time this will function like the MENU
button, used to enter the settings menu and sub-menu screens.
For screens with several settable fields, RIGHT can be used to
navigate between different fields within the screen.
• LEFT button: used to go BACK to the previous screen most of
the time. For screens with several fields, LEFT can be used to
navigate to the previous fields within the screen or BACK to the
previous screen if it is at the first field of the screen.
• UP or DOWN button: used to navigate between different options or
change the values of a field.
• HOME button: used to go BACK to MAIN screen in any settings
screens. All settings are saved when this button is pushed.
Enter Settings screens:
Pressing “MENU” will display: User Control, Timers, and Installer Set-
up. A new system will default to the Pool only with a 1-speed pump
and no accessories. Users can change these settings by entering
Installer Setup.
•
Installer Setup:
used for the system installer to configure the
OASIS. Use UP or DOWN buttons to highlight “Installer Setup”
option. After highlighting “Installer Setup”, press the MENU button,
then UP button, then DOWN button, to show the “Installer Setup”
screen with the following options:
>
Assign Output:
use MENU or RIGHT buttons to enter the
“Assign Output” screen. This screen will display two columns of
information. The left column shows the physical connection label
in the hardware board. The right column is the name of the
accessory in the system.
– Filter Pump can be set to: 1-Speed, 2-Speed, WWVSP,
Jandy VSP, Intel VSP, Hayward VSP, or WW VSP2.
– For a system with Pool/Spa, the intake and return valves
must use the “J1 INTAKE” and “J2 RETURN” connector in the
main board. ‘J1 Intake’ should be set to ‘Intake’ and ‘J2 Return’
should be set to ‘Return’. For a Pool only system, these two
valves can be assigned to any option.
– If the system has Solar, the solar valve must use “J3 SOLAR”
and be configured for ‘Solar’, otherwise this valve can be
assigned to any option.
– Move between items in the left column with UP and DOWN.
– Use the MENU or RIGHT button to navigate between columns.
– By default the right column shows ‘Not Used’. To change this
setting, use MENU or RIGHT to select the field and UP or DOWN
to change the value. Example: to assign “AUX2” to “BBQ Light”,
navigate to “AUX2” and press RIGHT to ‘Not Used’. Use UP to
scroll to “BBQ Light” and then MENU or RIGHT to move to the
next setting. Now “BBQ Light” will show in the Main screen and
Timers
menu.
– Some devices will show a secondary screen for the type of
device (i.e. Pool Light or Spa Light) or the mode for that device
(Pool, Spa, Spillover). Use the UP/DOWN buttons to highlight
and select the option. Use the LEFT/RIGHT/MENU buttons to
exit the screen.
– If any changes are made in the “Assign Output” screen, when
the user exits this screen, the system will reset after 2 seconds
and apply the new settings.
>
Freeze Protection:
this screen will allow the user to enable or
disable Freeze Protection and set the temperature for Freeze
Protection. With “Freeze Protection” highlighted, press the MENU
or RIGHT button to enter the “Freeze Protection” screen. In this
screen, use the LEFT/RIGHT/MENU buttons to navigate between
the fields and the UP/DOWN buttons to change the values.
>
Clear All Settings:
this will clear all settings to factory default.
With “Clear All Settings” highlighted, press MENU or RIGHT buttons
to select the choice, then press LEFT or HOME buttons to execute.
If user selects YES, the system will reset after 2 seconds to restore
factory defaults.
>
Board Test:
used at Factory only. Do not execute with devices
connected to the board
•
User Control:
settings that the user can change. Highlight “User
Control” and press the MENU/RIGHT button to enter. In this screen,
use the UP/DOWN buttons to highlight the desired option, then press
the MENU or RIGHT button to enter. LEFT button goes back to the
previous screen. There are several options under this screen:
NOTE:
‘Installer Setup’ is necessary to configure the OASIS Pool Controller for each specific
installation. Please pay special attention to the instructions above.
Installer Setup
Installer Setup
