PRIMING MODE:
When power is ON, the system will enter priming mode with ‘Priming
Mode’ displayed on the panel. In this mode, all devices such as JETS,
BLOWERS or LIGHTS are operable. JETS can be turned on and off to prime
the pump. The System will exit Priming Mode and go to the MAIN display
when the RETURN button is pushed, or after 4 minutes of inactivity.
Priming Mode
Press RETURN to exit
MENU NAVIGATING:
•
MENU: use to enter Setting menu and sub-menu screens. For screens with several settable fields (example: DATE-TIME
screen), use MENU to navigate between different fields within the screen.
•
UP and DOWN: use to navigate between different options or changing values of a field.
•
RETURN: use to confirm the setting and go back to previous screen.
SPA OPERATION:
Turn system accessories ON and OFF by pushing button on the right side of panel (LIGHT, JET 1, BLOWER, JET 2…)
These accessories have timeout defaults from the manufacturer and will turn OFF automatically after the time has
expired. Default Timeout time for LIGHT is 60 minutes; BLOWER is 15 minutes; JET at low speed is 60 minutes; and
JET at high speed is 15 minutes. The User can change these default times in “DEVICE TIMEOUT” settings menu.
SET TEMPERATURE:
To change water Set Temperature, use UP and DOWN buttons to set
the desired temperature. The screen will display “SET TEMP” with
the current set temperature. After 5 seconds without change to the
set temperature, the screen will go back to the MAIN screen with the
current water temperature displayed. Changing the Set Temperature
will turn on a pump so that the controller will be able to get an
accurate water temperature and determine if the water needs to
be heated.
Set Temp
100
°
F
4
HEATER:
When starting the heater, a pump turns on and the HEATER START-UP icon will appear.
The Heater will turn on and HEATER icon will appear after 5 minutes
