2
CLOCK / HOME
RIGHT / NEXT
LEFT / BACK
SETTING THE VALVE
SET CLOCK
Press CLOCK one time.
The hours will begin to flash.
Use or to adjust the hour. The hours will cycle through AM and PM.
Once the hour is set correctly, press one time to set the minutes.
Once you see the minutes flashing, use or to adjust the minutes.
Once time is set, press CLOCK.
SETTING REGENERATION TIME
Enter the Installer Screens by pressing and holding
+
simultaneously for for
3-5 seconds.
Once the display changes, press until you reach the “Regeneration Time” display.
When on the “Regeneration Time” display, use or to adjust the hour. The hours will
cycle through AM and PM.
Press to move the cursor to adjust the minutes. Use or to adjust the minutes.
Advance to the next Installer Screen by pressing OR you can return to the home display
by pressing
ERROR MESSAGE
SOFT RESET (to reset “ERROR” code)
Press and hold + REGEN simultaneously for 3-5 seconds until valve resets.
If the word “ERROR” persists, afer a soft reset, and a number is alternately flashing on
the display, contact an authorized WaterTech dealer for service help. This indicates that
the valve was not able to function properly. This is a rarely encountered malfunction.
