INSTALLATION OF INFINITY
PRODUCTS & PARTS DIAGRAM
1
3
2
4
7
TEFLON TAPE THREADS
Do Not Overtighten
9
6
PARTS
1.
Filter housing
(10-00-001)
2.
Bottom Inlet/Outlet cap assembly
(10-00-002)
3.
Vertical elbow
(10-00-003)
4.
3/8” PEX Drain valve assembly
with shut-off
(10-00-004)
6.
Bypass manifold
(10-00-006)
7.
Straight or 90-degree Angled In/Out
1” MNPT plumbing connectors
(10-00-007)
9.
Umbrella Cap
(10-00-009)
10.
Top Cap
(10-00-010)
11.
Retaining Ring
(10-00-011)
12.
Replacement Filter
(INF-SEN1-FX)
OR
(INF-GUARD1-FX)
DRAIN VALVE
IMPORTANT:
Bypass Orientation
INLET
OUTLET
Flow direction arrows on bypass are
incorrect for this filter application.
Plumb unit opposite of arrows.
6
10
11
The system and installation must comply with state and local laws and regulations.
Plumbing the filtration system assembly: The inlet and outlet of the filtration housing are
1” Threaded MNPT connections.
**No Use of Extra lubricants, unapproved sealants, and use of tools. Use of tools other
than hand tighten only parts, voids warranty.
Please allow 3 feet of open space above the system for replacement cartridges.
System to be supplied only with cold water.
12
2
