Remove Mud Guard from Valve
Remove Valve Plug
Prep tub filler for installation by raising theescutcheon and securing it so that it does notscratch the tubing.
Grease O-rings on bottom of tub filler.
1
2
3
4
Page 1: ...re beginning Risk of product damage Do not apply direct heat to the valve Excessive heat will damage the plastic components and plaster guard A mixed water supply is required for this product Componen...
Page 2: ...ove Mud Guard from Valve Remove Valve Plug Prep tub filler for installation by raising the escutcheon and securing it so that it does not scratch the tubing Grease O rings on bottom of tub filler 1 2...
Page 3: ...iller on valve Adjust alignment until desire orientation is achieved Use provided socket head screws and serrated washers to fasten tub filler to valve Open both hot and cold shut offs on rough in val...
Page 4: ...the Escutcheon down to the floor 10 9 11 1 888 304 0660 951 304 0520 www waterstoneco com Place a small bead of calk around the base to seal the floor Install the Hose and place Hand Shower in the Cr...