-Various data (see below)
Designation
Line
Floor drying current setpoint
-
Current drying day
-
Terminated drying days
-
State heat pump
8006
State DHW
8003
State heating circuit 1
8000
State cooling circuit 1
8004
Outdoor temperature
8700
Room temperature 1
8740
Room setpoint 1
Flow temperature 1
8743
Flow temperature setpoint1
DHW (domestic hot water) temperature
8830
Heat pump return temperature
8410
Setpoint (return) HP
Heat pump flow temperature.
8412
Setpoint (flow) HP.
3 9 Details
If the electrical power supply has been cut off while
the heat pump is operating (electrical power failure or
unprogrammed pressing of the on/off switch on the
hydraulic unit) the display will show error 370 when
the appliance restarts Do not be concerned, the
communication between the outdoor and hydraulic unit
will re-establish itself in a few moments
3 8 Information display
Various data can be displayed by pressing the info
button
Depending on the type of unit, configuration and
operating state, some of the info lines listed below may
not appear
-Possible error messages: The display shows the "Bell"
symbol
"
Consult your heating technician
-Service messages ; Special mode messages:
The display shows the “Key” symbol
"
Consult your heating technician
Operation manual "1780 - EN"
Hydraulic indoor unit
- 16 -
