2
Chapter 1
Installation Instructions
Step 1 –
Control Unit Installation
The Control Unit must be mounted with the control knob
facing the driver, and
the unit must be mounted within 10°
of level with respect to the boat’s waterline.
The unit can
be mounted either horizontal or vertical (see figures below).
Attach the Control Unit to the boat with the enclosed Velcro
tape, in a convenient location near the driver.
3
CORRECT horizontal mounting.
Knob is facing the driver, unit is
parallel to the floor of the boat, and the centerline of the Control
Unit is parallel with the centerline of the boat (bow to stern).
3
CORRECT verticle mounting.
Knob is facing the driver, and the
centerline of the Control Unit is parallel with the boat’s waterline.
3
3
