Watersnake STEALTH 54LB/48, Owner'S Manual

Page: 28 / 52

Watersnake Stealth Bow Mount Motor Manual ( Ver.1)
28
INITIAL POWER-UP
• Attach your Watersnake Stealth to a 12 volt
deep cycle or LiFePO4 battery.
• Deploy the motor and ensure locking
lever is in the up position.
NOTE: Your Watersnake motor is fi tted with a
tilt switch that prevents the motor from running
unless it is in the deployed (vertical) position.
NOTE: Your Watersnake remote control unit
will already be paired to the motor out of the
box. If it is not please refer to the pairing
instructions on page 30.
• Hold down the right-hand button ( on/off ) on the fascia panel on mount
assembly until all the lights illuminate.
• The four lower LEDs indicate battery condition.
They register as green or unlit, depending on charge remaining.
Motor in
deployed
position