Watersnake GPSmart, Owner'S Manual

Page: 19 / 28

www.watersnake.com.au
19
4. Using the left and right arrow buttons steer the unit so that it is aligned with
the keel of the boat (pointing straight ahead with the propeller facing the
stern of the boat).
5. Using another means of propulsion (main engine, paddle, etc.) begin to
continuously rotate the boat in a tight circle at a rate of one full revolution
every 20-30 seconds.
6. While holding down on the Manual ‘M’ button, press and hold on the Track
‘T’ button for 5 seconds until the system beeps.
7. After the boat has completed (2) full revolutions it will beep to indicate that
the calibration is now complete.
8. The system will return to Manual Mode. The rotation may now be stopped.
9. It is required that the Centering Calibration is now performed.
COMPASS AUTO-CALIBRATION (Optional)
Note: This procedure is provided as an alternative to the “Compass Manual
Calibration”for situations where external means of propulsion (i.e. outboard
engine or paddle) are not available. Generally speaking the “Compass
Manual Calibration” will provide a more accurate correction and is preferred.
Performing a compass calibration procedure is recommended as part of the
installation process to improve the accuracy of the GPSmart motor. It will
account for magnetic errors that can occur if the system is mounted close to
other metallic objects (i.e. cleats, steel fasteners, etc.) which may cause the
system functions to misbehave.
1. The boat must be in the water to perform this calibration. Make sure that
there are no obstructions nearby (docks, pilings, other boats, etc.) and that the
water is fairly calm.
2. Power up the system and deploy it using the depth collar to adjust the height
so that the motor can steer without any obstructions.
3. Press the ‘M’ button to enter Manual Mode. Please note that the system is in
an operational mode: Stay a safe distance away from the propeller to avoid injury.
4. Using the left and right arrow buttons steer the unit so that it is aligned with
the keel of the boat (pointing straight ahead with the propeller facing the stern
of the boat).
5. While holding down on the Manual ‘M’ button, press and hold on the Anchor
‘A’ button for 5 seconds until the system beeps.
6. The motor will now automatically steer to the right and ramp up the thrust
causing the boat to begin rotating. The boat will complete (2) full rotations and
then the system will beep to indicate that the calibration is complete.
7. The system will return to Manual Mode.
8. It is required that the Centering Calibration is now performed.
GPS
MART