Watersnake ADVANCE SWBL 95, Owner'S Manual

Page: 7 / 32

www.watersnake.com.au
7
ATTACHING THE PROPELLER
Before doing anything with the propeller, ensure the cables to
the battery are disconnected.
1. Place the propeller over the shaft and slide into position.
2. Place the washer over the shaft and
tighten the nut with the tool provided.
3. Insert the Cotter Pin into the hole in the shaft,
bending the pin legs where they exit the shaft to
stop the pin falling out.
Prop
Shaft
Propeller
Washer
Nut
Cotter
Pin