Watersnake ADVANCE SWBL 42, Owner'S Manual

Page: 14 / 32

Watersnake
14
Noise or vibration coming from motor
Check that the propeller is securely tightened and the Cotter Pin is correctly
in place. Remove propeller and check for any build up of fi shing line / weed
or any other debris. Check your 12v deep cycle battery is fully charged. See
below.
Motor will not run at variable speeds
• Check that your deep cycle battery is fully charged and that your motor is
receiving 12v. If it is not check the following:
• Check terminals and connnections are secure and not loose.
• If your battery is producing 12v, check your motor is receiving 12v.
Watersnake recommends the use of a Multimeter.
• Check terminals, connections, fuses and circuit breakers for any signs of
damage or corrossions or build up of debris.
• If your original battery lead that was fi tted to the motor has been extended,
ensure the correct guage of wiring has been used for the extension. When
checking this allow for Votage Drop. (See Page 11)
A number of service videos are available on the Jarvis Walker Brands
Youtube channel – search “Jarvis Walker Brands” from the Youtube search
function. Please contact Jarvis Walker or your nearest service agent should
issues persist.
TROUBLE SHOOTING