Waters Xevo TQD, Operator'S, Overview And Maintenance Manual

Page: 162 / 250

4-86 Maintenance Procedures
2. Gripping the probe heater as shown, carefully pull it off the probe
assembly.
3. Dispose of the probe heater in accordance with local environmental
regulations.
Fitting the new IonSABRE II probe heater
Required materials
• Chemical-resistant, powder-free gloves
• IonSABRE II probe heater
Caution:
To avoid damaging the probe heater’s electrical
connections, do not twist the heater when removing it from the
probe assembly.
Warning:
The probe heater can be contaminated with
biohazardous and/or toxic materials. Dispose of it according
to local environmental regulations.
Probe heater