42
Replacing the detector’s leak sensor
Required materials
•
Clean, chemical-resistant, powder-free gloves
•
Leak sensor
To replace the detector leak sensor:
1. Open the detector door, gently pulling its right-hand edge toward you.
2. Press down on the tab to detach the leak sensor connector from the front
of the instrument.
Warning:
The leak sensor and its reservoir can be contaminated
with biohazardous and/or toxic materials. Always wear clean,
chemical-resistant, powder-free gloves when performing this
procedure.
Leak sensor
connector
Press down on tab to
release connector
Summary of Contents for ACQUITY UPC2
Page 84: ...Index 4...