June 28, 2016, 715003956 Rev. C
Page 99
Figure D–15:
Exhaust trap bottle
D.8.1
Connecting the exhaust solenoid cable
To connect the exhaust solenoid cable:
1.
Connect the exhaust solenoid cable to the port on the exhaust trap bottle.
Figure D–16:
Exhaust solenoid connection
2.
Connect the other end of the cable to the exhaust solenoid connection on the rear panel of
the instrument (see
Warning:
To avoid electric shock, ensure the instrument is powered off when
connecting the exhaust solenoid cable.
From instrument
exhaust connection
(12-mm OD)
To laboratory exhaust
port (12-mm OD)
Exhaust solenoid
cable
From instrument
exhaust connection
(12-mm OD)
To laboratory exhaust
port (12-mm OD)
Exhaust solenoid
cable
