Waters Network Systems
User’s Manual
Page 116
GSM-2108/GSM-1008SFP
Command Syntax
Description
Argument
Possible
Value
must be set
Show
show
Used to show the specific
management policy record
None None
Max-pkt-len
Set len
set len <range>
<lenth>
Used to set the maximum
length of the packet that each
port of the switch can accept
<range>: port range,
syntax 1, 5-7,
available from 1 to 8
<length (bytes)>:
maximum packet
length
<range>: 1 to 8
<length
(bytes)>:
1518/1343/921
6
Show
show
Used to display current setting
for maximum packet length
None None
Mirror
Set mirror-
mode
set mirror-
mode
<rx|disable>
Used to set the mirror mode (rx
mode or disable)
<rx | disable>:
rx:enable the mode of
mirror (only mirror
packets that are
received)
Disable: end of the
function of mirroring
<rx | diable>: rx
or disable
Set monitored
port
set monitored-
port <range>
Used to set the port that will be
monitored. The packets
received by this port will be
copied to the monitoring port.
<range>: the port that
is chosen for
monitored port for the
mirror function,
syntax 1, 5-7,
available from 1 to 8
<range>: 1 to 8
Set
monitoring-
port
set monitoring-
port
Used to set the monitoring port
for the mirror function. User
can observe the packets of the
monitored port received by this
port.
<#>: the monitoring
port that is chosen for
the mirror function.
Only one port is
allowed to configure,
available from 1 to 8
<#>: 1 to 8
Show
show
Used to display the setting
status of the Mirror function
None None
Port
Clear counter
clear counter
Used to clear all ports’ counter
information (including simple
and detailed port counter)
None None
Disable flow-
control
disable flow-
control <range>
Used to disable the flow control
function of the port
<range>: syntax 1, 5-
7, available from 1 to
8
<range>: 1~8
Disable state
disable state
<range>
Used to disable the
communication capability of the
port
<range>: syntax 1, 5-
7, available from 1 to
8
<range> :1~8
Enable flow-
control
enable flow-
control <range>
Used to enable the flow control
function of the port
<range>:syntax 1, 5-
7, available from 1 to
8
<range>: 1~8
Enable state
enable state
<range>
Used to enable the
communication capability of the
port
<range>:syntax 1, 5-
7, available from 1 to
8
<range>: 1~8
Set speed-
set speed-
Used to set the speed and
<range>:syntax 1, 5-
<range>: 1 to 8
