To connect the cables:
1.
Insert the connector into the connector port on the module's rear panel.
Figure 2–2: Inserting connector into connector port
Connector port
Connector
2.
Using the flat-blade screwdriver, attach the positive and negative leads of the
signal cable to the connector.
Figure 2–3: Positive and negative lead connections
Screw
Connector
Signal cable
3.
Fit the grounding cable's fork terminal on the rear-panel grounding stud, and
secure the terminal using the locking nut.
December 7, 2015, 715004730 Rev. A
Page 22