STEP THREE
Place the Tank Assembly between the Rails.
STEP FOUR
Place the Footboard between the Rails positioning the top two holes over
the two threaded holes in the back Tank Unit. Screw the Handle Rests into
position using the Handle Rest Bolts, do not over tighten. It may be necessary
to slightly loosen the two bolts on the Top Deck (A) to allow the Footboard
clearance.
A
STEP FIVE
Insert the JCN Nuts and JCB Bolts attaching the Tank and the Footboard to the
Rails at A & B. The Nuts should be placed on the inside and the Bolts on the
outside. Should you experience any problem with aligning the components,
loosen all the fasteners, align and re-tighten.
Handle Rest Bolt
Handle Rest
JCN Nut
JCN Bolt
A
B
STEP SIX
Press the Heelrest Adjustment Button (A) and insert the Heelrest/Footpads
into the Footboard Cover Plate (B).
STEP SEVEN
Undo the Dolley Wheel Assembly and fix to the Rail in the order shown and
tighten. Note - the Wheel goes on the outside of the Rail.
A
B
B
A