Remove the Forward Riser Assembly
Replace with the new Forward Riser Assembly
To secure the replacement Forward Riser in place, screw back in the 4 bolts and washers securing the Front End pad to each rail.
We recommend leaving these slightly loose in case any adjustment is needed when securing the tie rods.
Replace all 4 tie rods, the lower tie rods should screw straight in
to the housed barrel nuts.
The upper tie rods require holding the barrel nut in place to screw
in the tie rod.
Replacing The FoRwaRd RiseR
sTep 8
sTep 9
sTep 10
sTep 11
WRM7075
