7
EVERY 1 TO 2 YEARS
Replace the Batteries
If the monitor readings begin to fade or are
incorrect, we recommend changing the batteries.
Four AA batteries are located behind the monitor.
Using a Phillips screwdriver, unscrew the two
screws, one on left and one on the right of the
monitor, and gently lift to access the battery pack
located behind the monitor. Check the batteries
are positioned correctly in the battery pack.
Replace the batteries and reattach the screws to
the monitor housing.
Replace the Bungee
Over time, and with use, the bungee cord can
lose its elasticity, which will affect the recoil of the
machine. If this happens, it should to be replaced.
To perform this task, detach the bungee from
the recoil belt. Next, remove the two horizontally
positioned bolts with the 5mm allen key from the
bungee pod.
Remove the old bungee assembly and position
the new one into place on the rear bumper.
Replace the two horizontally positioned bolts with
5mm allen key.
Summary of Contents for M1 SERIES
Page 2: ...2...
