13
RECOIL
Sluggish Recoil
First, remove the top deck cover and check
the belt alignment to make sure all straps are
positioned correctly on the pulleys.
Second, when the handle is in its full forward
position next to the forward riser pulley. Check the
recoil belt is wound 1½ times around the shaft of
the paddle, underneath the clutch.
Third, shorten the recoil strap by readjusting the
strap in the buckle. Be careful not to make the
recoil belt too short, as the connector may catch
on the forward riser.
Replace the bungee cord if necessary (refer to
page 7
).
Please contact
or call
your nearest WaterRower office to order a new
bungee.
SEAT
Ensure the seat is correctly positioned on the rails.
The rail extrusions and the guide wheels are under
the lip on the extrusion. If the seat does not slide
smoothly with first use, check the rails are clean
and free from obstruction. If the seat feels rough,
clean the rails and the seat wheels.
If the problem persists, please contact your
nearest WaterRower office, or email:
.
Wrapped 1½
times around
Load
Wheels
Guide
Wheels
Summary of Contents for M1 SERIES
Page 2: ...2...
