waterpowered pink SHOWER Basic, User Manual

Page: 9 / 12

9
side, making sure that none of the screws is
under the neck of the tap (
fi g.9);
• it follows the inclina on of the fi lter holder
of the tap to allow the gasket to adhere
completely and ensure the seal (
fi g.10);
• it is as high as possible compared to the
fi lter holder of the tap ( fi g.11).
Special Cases
•
Some fi lter holders have a slight nook:
please make sure that the ps of the screws
do not lean against the nook to prevent
Addy from detaching.
• In case of taps that are slightly fl ared/
rounded (like kitchen taps), mount the
screws on the straight side of the
fi lter
and never on fl ared parts to prevent the
adaptor from coming o ff the tap ( fi g.12).
Holding Addy to the tap with the aid of your
thumb as shown in
fi g. 13, use the fastening
key (J2) to screw the three screws to a secure
hold on the tap, following the direc on
indicated by the arrow posi oned on the
cylindrical housing of the screws (
fi g.14).
Once you ghten one of the screws all the
way, it is recommended for even stronger to
ghten the remaining two screws, without
forcing them ( fi g.14).
While ghtening the screws, be careful
not to damage the inner gasket to avoid
compromising the hold (
fi g.7).
INSTRUCTIONS and SUGGESTION FOR ADDY:
• For a correct use of Pink Shower it is su ffi cient
gradually open the tap, do not open the
water
fl ow all at once. For a correct use of
Pink Shower it is su ffi cient to open the tap
not at full pressure, but just un l the water
fl ows from the valve located in the quick
connector.
• Ini ally, for the fi rst few moments, there
* The installa on of the fi lter to the tap should
be done only the fi rst me you connect Pink
Shower: the exclusive fi lter for tap Pink
Shower does not need to be removed and
replaced a er each use because it allows
normal use of the tap
( fi g.5), providing
ven la on and fi ltering of the water. (The
special fi lter Pink Shower is adaptable to
all taps UNI EN 246. Such a standard is
usually respected by all the
fi lter taps on the
market that present an aerator that can be
unscrewed).
** Through the “mul func on shower joint”
present in the range of accessories and sold
separately.
To view the phases of assembly, watch videos
on www.pink-shower.com in the “video” and
“how to use it” sec ons.
QUICK UNIVERSAL ADAPTOR ADDY
Included only with Pink Shower Travel or you
can purchase it separately as an accessory. The
adaptor Addy (J) allows you to connect Pink
Shower to the tap in a quick and easy way,
without
having to mount the threaded
fi lter (A1 or A2). It
is ideal for use while travelling, in a hotel or in case
of non-standard tap thread.
Addy can be connected to all the taps with water
fi lter with an outside diameter from 16mm to
25mm and minimum length of 5 mm ( fi g.6).
ASSEMBLY TO THE TAP FOR ADDY
Check that the three screws are loose and
the gasket is properly in place, without visible
deforma on (
fi g.7). Hold Addy as in fi gure
8, pushing up un l the gasket completely
adheres to the
fi lter holder.
Place Addy under the tap making sure that:
• one of the 3 screws is aligned with the tap
and the two remaining screws are on the