mounting instructions
Bed rail mount
step 1
Prepare T-Nuts
Insert 5/16” jam nut (thin nut) into the
back of each T-slot nut.
step 2
insert into bed rail
Insert the T-slot nut into the bed rail by
sliding them into the front or back of
your bed rail. Make sure they are aligned
with the upper bolt holes on your
mounting bracket.
step 3
Attach Brace
Insert the 5/16” bolt through the bottom
center of your universal mount. Slide in the
5/16” lock nut into the center of the plastic
clamp. Tighten until the clamp is securely
fastened to the universal bracket.
Always lock your tank in the mount while driving.
Slide a bolt or padlock through the
hole in the top of the mounting bracket to lock your tank in place.
step 4
mounting plate
Once aligned, thread bolts through.
Screw in all three 5/16” bolts into the
T-slot nuts. Fasten screws until the
mounting bracket is firmly attached to
your vehicle’s bed rails.