filling instructions
manually filling
step 1
fill with water
Remove large top cap and fill 85% of
the tank with water, leaving 15% air
for pressurization.
step 2
Re-pressurize
Re-pressurize using the schrader valve
located on the side of the tank. Pump air
into the tank using a compressor or
bike pump.
Do not exceed 40 p.s.i.
And anything else that requires running water…
basic usage
what should I use it for?
Once you have chose your mounting location and securely fastened the mounting
bracket(1), you will need to join both mounts by sliding the WaterPORT™ Bracket(1) down
into the Mounting Bracket(2). To remove, lift your WaterPORT™ upward and slide the tank
out of the mounting bracket.
n
Rinsing Off Your Gear
n
Emergency Water Source
n
Cleaning Your Camping Dishes
n
Showering Off
n
Washing Pets
n
Surfing & Fishing