6
6
GETTING STARTED
Eject
Fill
MODE
HIGH
MEDIUM
Pressure
Setting
Insert
LOW
MEDIUM
Charging Unit Prior to First Use
Plug the power cord into the wall and place the magnetic charger on the front of the unit for approximately 4 hours (see image).
The charge indicator on the handle will fash when charging and will turn of when the unit is fully charged. A full charge will last for
approximately 1 week of typical use. When the batteries are in need of charging (approximately 30% charge lef) the charge indicator
light will blink 8 times quickly afer use to indicate that you should recharge the unit. A complete recharge will take 3 4 hours. If you use
your Water Flosser once a day or less, it is recommended you charge it once a week. If you use it twice a day or more, charge the unit
more frequently.
Filling the Reservoir
Remove the magnetic charger from the unit prior to flling reservoir and product use. Lif fip top on reservoir and fll the reservoir with
lukewarm water.
Inserting and Removing Tips
Insert tip into the center of the knob at the top of the Water Flosser handle. Press frmly until the tip clicks into place. To remove the tip
from the handle, press the tip eject button and pull tip from the handle.
CAUTION: Do not press tip eject button while unit is running.
Adjusting the Pressure Setting
You can adjust the pressure setting on your Water Flosser by pressing the mode button on the handle. Start with the lowest setting and
increase to your liking.