Waterous Floto-Pump, Operation And Maintenance

Page: 15 / 40

15
|
40
Safety Introduction Product Overview Operation Maintenance Service Parts Troubleshooting Warranty
Fueling the Pump
2
3
1
4
Use the illustrations and instructions to fuel the
Floto pump. Locally source 2-cycle engine oil
(National Marine Manufacturers Association
TC-W3 ® ) and gasoline.
Note: Use gasoline with a minimum octane of 87
and less than 10% alcohol.
1 Prepare a fuel container to mix the gasoline
and oil before transferring it to the fuel tank.
2 Add oil to the container to make a 24:1
gasoline to oil mixture. Refer to the following:
Gasoline Oil Gasoline Oil
1 US gallon 5.3 fl oz 1 L 42 ml
3 US gallons 16 fl oz 10 L 417 ml
5 US gallons 27 fl oz 20 L 833 ml
3 Add enough gasoline to the container to make
a 24:1 mixture.
4 Remove the fuel cap and pour mixture into the
fuel tank. Install the fuel cap after fueling.
Note:
Allow the engine to cool after operating
before fueling. Wipe up any fuel spills.