2. Place the pan into position centralising the pan on your centre line, draw around the pan base
and mark the entry points on the floor to where the floor fixing holes are on the side of the pan.
3. Remove the pan and drill and screw into place the floor fixing brackets, set the floor fixing
brackets 15mm inside the line drawn around the base. Use suitable floor fixing screws & toggles
to suit the floor material.
4. Critical, the pan must be on a level surface, if the floor slopes away the pan will need to levelled
using suitable floor chocks around the pan to support and stabilise the pan.
Toilet cistern installation
1. Marking Cistern wall fixing holes- place cistern onto Pan without sponge gasket, square up cistern
to pan and mark wall through cistern fixing holes, remove cistern and drill wall and fit suitable wall
plugs based on wall material.
2. Locate the cistern on to the pan with the sponge gasket placed on the cistern outlet valve tail
and connect the tank to pan using attachment bolts. Ensure that the cistern and pan are china to
china contact when tightened. DO NOT OVER TIGHTEN.
3. Screw cistern to wall using suitable screws and preassembled wall plugs.
4. Connect one end of the supplied Female to female Flex connector to the inlet valve (DO NOT
OVER TIGHTEN), connect the other end to mains Water. (DO NOT OVER TIGHTEN).
5. Place cistern lid on top of the cistern and check push button workability.
6. Assemble the seat using the seat assembly instructions supplied in the seat box.
Important
: Sand and debris move through water pipes. Always flush the line prior to
connecting Toilet Suite inlet pipe to water control valve.
Warranty Contact Details:
Tradelink Pty Ltd
ABN: 29000003832
1051 Nudgee Rd
Banyo QLD 4014
Ph: 1300 658 277
[email protected]
Warranty:
For continued piece of mind, this product comes with limited warranty from date of purchase.For full warranty
terms and conditions of the warranty including how to claim and your rights as a consumer, please consult
www.raymor.com.au .
“
If you are a consumer as defined under the Australian Consumer Law,our goods come
with
guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure
does not amount to a major failure.
”
Issue Date: 10 Oct 2020
Revision Number: 1.0
Revision Date: N/A
