Copyright © 2017Watermaid Pty Ltd
Version 20170223
- 11 -
5.2
Setting the Clock
The WATERMAID® WM44's inbuilt clock employs a state of the art LCD display and has battery back-up. After
a power outage, the WM44 will recall the last previously saved settings, including those for the clock and
timers. This ensures that the pool is adequately sanitised at all times.
Step
Action
Display
1
From the home screen, press CLOCK.
2
Press DAY (day field will now flash) and then use the
▲
and
▼
buttons to select the current day of the week.
3
Press HOUR (hour field will now flash) and then use the
▲
and
▼
buttons to select the current hour.
4
Press MIN (minute field will now flash) and then use the
▲
and
▼
buttons to select the current minute.
5
Press CLOCK to save the time settings and return to the home
screen.
5.3
Setting Timers
The WATERMAID® WM44 has six (6) inbuilt timers. Any number between one (1) and six (6) timers may be
used at any one time.
Timers may be set for all days of the week (Monday to Sunday), individual days, weekends only, or weekdays
only.
If multiple timers are set that conflict with each other, the WM44 will default to the timer with the longest
run time.
The factory default timer setting is "ON" commencing at 06:00 for a period of eight hours, every day of the
week.
In the following example, Timer 1 will be changed from the factory default to operate for 8 hours commencing
at 9:00 a.m., every day of the week.
NOTE:
When setting timers, the ENTER button is only used to select the Timer mode (ON/OFF) and the
individual timers (T1 to T6) to be set.
