WL500
Manual
Page 35 Revision 4‐10‐2019
PROGRAMING DEFAULT DISPLAY AND DISPENSE PROGRAMMING
Defaults Display and Dispense Selection after 3 seconds
Cold ‐ Default
Sparkling
1.
Enter the Programming Mode in “Accessing Programming Mode” instructions.
2.
Press Hot Selection Button (No. 3) to see what the current setting is.
3.
Press Sparkling Selection Button (No. 2) to select “On” or “Off”
Recommended / Default Setting is On
4.
Press Hot Selection Button (No. 3) to save the setting chosen.
5.
Press Extra Hot Selection Button (No. 4) to exit programming mode.
Default Set
3
2
3
4
