WL500
Manual
Page 32 Revision 4‐10‐2019
PROGRAMING – FILTER TIMER
Timer for Filters Life:
NONE – Timer for Filters turned off – Default Setting
3 months – Displays “Change Filters” after 3 months
6 months – Displays “Change Filters” after 6 months
9 months – Displays “Change Filters” after 9 months
1.
Enter the Programming Mode in “Accessing Programming Mode” instructions.
2.
Press Hot Selection Button (No. 3) to see what the current setting is.
3.
Press Sparkling Selection Button (No. 2) to select “None, 3 months, 6 months
or 9 months)
Recommended / Default Setting is NONE
4.
Press Hot Selection Button (No. 3) to save the setting chosen.
5.
Press Extra Hot Selection Button (No. 4) to exit programming mode.
Filter Timer
3
2
3
4
