WaterLogic WL400 Series, Service Manual

Page: 12 / 31

WL400 Manual Page 24 – Revision: 5‐2‐2018
REPLACEMENT COMPONENTS
Component WLCP PN Frequency of Replacement
UV Light, 13 Watts 10‐8075
Every 6 months, or as required
Part No CT‐2090‐A
Spiral 10‐8080
Clean every 12 months, replace as needed
Part No ‐0007‐A
Hot Tank 185°F (85°C) HT‐3037‐A
Replace every 3‐5 years depending on
usage
Part No HT‐3037‐A
Sediment Filter 10‐8050
Every 6‐months, or as required. Local
water conditions will determine proper
filter type and maintenance schedule.
Part No. RO‐0001‐A
Pre‐Carbon Filter 10‐8055
Every 6‐months, or as required. Local
water conditions will determine proper
filter type and maintenance schedule. Part
No. RO‐0002‐A
RO Membrane Replacement Kit 10‐8061
Every 6‐months, or as required. Local
water conditions will determine proper
filter type and maintenance schedule.
Post Carbon Filter 10‐8065
Every 6‐months, or as required. Local
water conditions will determine proper
filter type and maintenance schedule.
Part No. RO‐0005‐A
* One pre‐installed. One required for NSF‐53 and NSF P231 Certification.
Replacement parts can be obtained from Waterlogic or an Authorized Waterlogic Dealer .
See Parts Layouts, Drawings, and Lists for additional repair parts.
Hot Tank Service
Hot Tanks (with controls) must be replaced at least every 3‐5 years depending on usage. Descaling
hot tank may be required on a regular basis depending upon filtration and local water conditions.
See Service Section.
NOTE :
At the end of this product’s life , ensure that it is disposed of in an environmentally friendly manner
which is fully compliant with all Federal/State/Local Requirements and Guidelines.