background image

 

WATERLOGIC MANUFACTURED WATER TREATMENT SYSTEM LIMITED WARRANTY 

UNITED STATES AND CANADA ONLY 

 

 

Waterlogic water treatment systems are guaranteed to the original purchaser to be free of defects in 

materials and workmanship for a period of three (3) years from the date of purchase, but in no event 

longer than forty-eight (48) months from the date of manufacture. Waterlogic Commercial Products, LLC 

(“Waterlogic”) based in the U.S.A. and its affiliated companies are not liable for any cost of removal, 

installation, transportation, or any other charges which may arise in connection with a warranty claim. 

 

This warranty does not cover damage or wear to products caused by abnormal operating conditions, 

accident, abuse, misuse, unauthorized or improper alteration or repair, damage caused by or resulting 

from shipping or accident, damage caused by hot water, freezing, flood, fire, or acts of God. The effects 

from chlorine corrosion, scaling and normal wear are specifically excluded from this warranty. This 

warranty does not cover products used outside the countries where the unit was purchased, and does not 

cover products that were not installed in accordance with Waterlogic printed installation and operating 

instructions obtained in training or from www.waterlogic.us. Failure to follow all instructions for operation 

and maintenance voids the warranty. This warranty is not transferable. 

 

To obtain warranty repairs or replacement, you must obtain a Return Authorization from Waterlogic. To 

obtain a Return Authorization, you must submit a Return Authorization form with supporting 

documentation to Waterlogic for evaluation. The form is available at www.waterlogic.us. Supporting 

documentation must include, but is not limited to; proof of purchase, installation date, failure date, and 

supporting installation and maintenance data.  After you submit a Return Authorization form and 

supporting documentation, Waterlogic will determine whether a reasonably apparent defect in materials 

or workmanship covered by this limited warranty exists. If Waterlogic determines the claimed defect is 

covered by this warranty, Waterlogic will, at its sole discretion, determine whether to correct the defect or 

replace the unit, free of charge to you. If Waterlogic determines that the unit should be returned for 

warranty service, Waterlogic will approve of return in writing and will issue a Return Authorization which 

you must obtain prior to shipping the product. You are responsible for the cost of freight in to Waterlogic. 

 

Waterlogic and its affiliated companies hereby limit the duration of any and all implied warranties to a 

maximum period of three (3) years from the date of purchase including, but not limited to, the implied 

warranties of merchantability and fitness for a particular purpose. Some states do not allow limitations on 

how long an implied warranty lasts, so the above limitation may not apply to you. Consequential and 

incidental damages are not recoverable under this warranty. Some states do not allow the exclusion or 

limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to 

you. 

 

This warranty gives you specific legal rights and you may also have other rights which may vary from state 

to state. 

 

New Warranty Policy issued by Waterlogic Commercial Products LLC, USA - January 10, 2014 

 

Waterlogic Commercials Products LLC

  

 

 

 

 

 

Tel: 

 (800) 288-1891

 

11710 Stonegate Circle 

                    Website:  

waterlogic.us 

Omaha, NE  68164 

 

 

CUBE

 Operating, Installation, and Service Manual 

                                                                        Page 76 - Revision:  6-23-2015 

 

Summary of Contents for WL Cube













































































Reviews: